Price: [price_with_discount]
(as of [price_update_date] – Details)

[ad_1]

Product Description

Facmogu DC 12V 5A Power Supply Adapter, AC 100-240V to DC 12V Wall Plug Transformer 60W Wall Mounted Adapter

Input Supply: 100-240V ACFrequency: 50-60HzOutput Voltage Rating: 12VOutput Current Rating: 5APower Rating: 60 WattsIncredibly Low Fault Rates, Low Energy ConsumptionNo Minimum Load, Regulated Stable VoltageStabilized Output, Low Ripple & Low InterferenceFit for both 5.5×2.5mm & 5.5×2.1mm plugTotal Length: 150cm / 4.92 feetPackage: 1PCS 100V- 240V AC to DC 12V 5A (5000mA) Power Adapter – White

How to Choose the Right Power Adapter?

You need to know the recommended charging voltage and current listed on the device you are going to power. The particular voltage and current requirements of the device are usually found written on the device itself.

It is important to know the correct VOLTAGE requirement.

In the best of circumstance, if one uses a device with a lower voltage than specified, the device will not operate correctly in an obvious and immediate way. At other times the device might seem to be working correctly only to later fail under a particular circumstance.In other words, when you stray from the required specs, unexpected bad things may occur. Some devices can be damaged by too low a voltage for extended periods of time. If, for example, the device has a motor, it may not be able to develop enough torque to turn and just idles generating heat. It is also possible the device draws more current to compensate for the lower voltage. This higher than the intended current can cause damage to the device.Using higher than specified voltage also can have significant consequences since electrical components all have voltages above which they fail.

2. It is also important to know the correct CURRENT requirement.

The load is determined by the device. That is, a device that uses 2 A of current will draw 2 A of current whether the power supply can only provide the 2A, or whether it could supply 3, 5, or any other A. The current rating of a supply is what it can deliver, not what it will always force through the load.As opposed to a voltage where higher than or lower voltage than needed can damage the device, the current rating of power supply must be at least what the device wants but there is no harm in it being higher.When replacing a previous power supply, consider that power supply’s rating to be the device’s requirements. For example, if the device does not have a visible label but the device was powered from a 12V and 1 A supply, you can replace it with a 12V and 1 or more-amp power supply.

【IMPORTANT NOTE⚠️】– Compatible with 12V DC equipment, please make sure that the output voltage of your electronic device is 12V and the output current is less than or equal to 5A, the rated power is within the range of 60W! This is a 5A power converter. If a product exceeding 5A is connected, which will cause not working properly. (NOTE: To know more about how to choose the right power specification, please slide to the product description.↓ ↓ ↓)
【Power Specifications & 1.5m Cable Length】– Power Supply with Input AC100-240V- 50/60Hz and Output: DC 12V/5A (5000mA). With a 150cm (4.92 feet) Total Length Cable, you don’t have to worry about your devices can not being placed too far from the socket. Indoor use only! We offer 1-YEAR Warranty from the date of purchase.
【Plug Design】– Fit for both 5.5×2.5mm & 5.5×2.1mm plug. This cable terminates with a “standard” 5.5mm OD, 2.5mm ID DC plug, but it’s also compatible with DC 5.5×2.1mm socket with the inner center spring contact. (***NOTE***Power Supply Polarity: Center or Tip is positive (+), Sleeve is negative(-).
【Built-in Power Supply Protection】– Certified by UL, it ensures safe use with over voltage, over current, and over temperature protection to keep all of your mobile devices safe from unexpected surges and spikes. Wide voltage range from 100V to 240V makes it suitable for travel.
【Wide Applications】– 12V 5A Power adapters are in high demand for audio amp boards, portable powered speakers, cable boxes, LED light strips, LCD monitor, wireless routers, CCTV cameras, DC motors, 3D printers, computer projects, HUB, Switches, audio/ video power supply, and Arduino controllers to provide a safe and stable power supply for your creation.

[ad_2]